Notes When Using Soy Peeling Machine

Precautions when using soybean peeling machine:

(1) in the debugging, all the transmission part to fill the oil, pay special attention to ensure that the bearing position, vibration motor. Carefully check whether there is a card, touch the phenomenon, with particular attention to whether there is no iron between the peeling roller, screws, hard objects, require manual peeling roller movement freely. Then, turn on the power supply adjustment direction. According to the (suction leather fan) → skin kernel separation screen → peeling machine → feeding roller for the order (shutdown on the contrary.) Empty test for 30 minutes, carefully check the bearing position, motor drive position, No unusual sound, before a small amount of material to vote test.

(2) according to the requirements of raw materials, peeling or the production process technology, can stop the gap between the peeling roll adjustment. The general 2.5-3.5 mm. exchange of soybean with different aperture sieve separation of hull and kernel meet the technique requirements of the best.

(3) no material boot and shutdown, when suddenly shut down, to manually remove material peeling roller, rotate freely, to boot.

(4) in normal production, according to the production time, regular inspection of the transmission parts, to ensure the oil level, fasteners are normal, overhaul, you can open the bearing cover, gasoline bearing bearings filled with butter.
(5) the vibration motor, the motor seat and the drive shaft must be locked with double nuts so as to avoid the vibration of the vibration motor and the fracture of the transmission shaft when the motor seat is loose.