How to Operate Peanut Shelling Machine?

Peanut shelling machine is one of the main products of our company. How much do you know about the operation and use of peanut peeling machine? Next, let's see !
1, Fixed the motor, so that the two Geneva in the same line, the power must be properly grounded, good anyway, after the turn, idling stop after 5 minutes to check whether all parts of screws loose, loose belt, lubricating parts are hot pressing, and two new, if there is abnormal should be adjusted.

2, Coarse and fine rubber rollers is gapless with coarse rollers by adjusting the spring pressure, through the action of the rocker arm is tightly pressed on the fine spring roll, pitch is bigger, the pressure is small, to the rough roller pressure is small, and vice versa. The spring pitch adjustment requirement is about 2-4mm, which is the key to the peeling effect. The machine has been adjusted to the position of use when it is factory, but the user should pay attention to the adjustment according to the actual situation.

3, Before the operation, protective cover peanut shelling machine transmission part cover, provisions must perform safety first in operation, in strict accordance with the operation procedures, there may not be any negligence.