Sesame Seed Roasting Machine Operation Process
Category: Blog
Sesame seed roasting machine is an important equipment in sesame food processing. It is necessary to strictly follow the following operation process:
1, the total power switch: the user to configure the power switch, the power switch from the power line to electric oven.
2, power supply to the oven: check the equipment running parts, press the power switch to power the oven.
3, no-load heating, debugging equipment: press the rotary cage forward switch, let the rotor rotation for 3~5 minutes, and then press the switch for heating electric heating tube of the rotor cage heating, and then use the screwdriver to adjust the temperature control instrument on the temperature control knob, upper and lower adjusting required oven temperature (by temperature control the digital display instrument can know the temperature difference between the upper and lower limits of the general regulation to 3~5 degrees). When the temperature reaches the upper limit, the electric heating tube stopped heating when the temperature began to decrease slowly when the temperature drops to the lower temperature, the temperature controller will restart the electric heating tube heating, so again and again, until the material baking to the requirements of the standard.
4, timing alarm: third steps to adjust after debugging, then press the timer switch, adjust the required set time, debugging can be set to a few minutes (time in the control box of the time relay increases, 0~99 minutes adjusted), after a period of time, the bell rang the alarm that bake the time has come. Then the operator closes the timer switch, and the alarm doesn't alarm any more.
5, release the material from the cage: after alarm, turn off the timing switch. Open the door of the material outlet, let the discharge port open, then press the cage stop button, 3~5 seconds later, then press the cage inversion button, the material will be spin out of the cage, discharge from the discharge port, until the material emptying. Finally, close the door panel, press the stop button, 3~5 seconds, and then press the forward button, then the cage is beginning to turn forward.
