Peanut Stone Cleaner Machine Operation Guide

The main function of peanut stone cleaner machine is to grading peanuts, focus on clean mixed peanut and stone. Before using peanut stone cleaner, we must first understand peanut stone cleaner machine operation guide, so the following we have summarized six for your reference.

 

1, the adjustment of the vibration direction angle: In the course of work, release the lock handle, rotating the small circle on the vibration sign into a straight line for the correct position, and then lock, then the indicator of the corresponding scale, that is, vibration Direction angle. Generally about 30 degrees.

2, the amplitude adjustment: In the work process, the application of visual persistence principle, when the sign is in the above position, the intersection of amplitude observation line corresponds to the scale of the actual amplitude value. If the measured value is not 4-5mm, and the effect is not good during the normal vibration, adjust the amplitude by adjusting the balance block in the vibration motor. Note that the two motors are highly consistent and locked after adjustment.

3, to stone machine must be started at rest. The butterfly valve handle adjustment instructions "6" position, the stone valve plate alignment at the bottom, adjust the front adjustable support rod so that the screen angle of about 7o tilt, start the suction system and check the work is normal , Start the machine, adjust the feeding door, the material to reach half of the transparent glass is better, wait a few minutes, the stone appears in the valve plate, raise the valve until the beginning of the row of stones, this time no longer increase the opening, but if the stones After the accumulation of the valve plate, valve plate height can be increased. If the valve plate open large and no stone discharge, need to reduce the slope of the sieve body. If there are too many peanuts and gravel together, try to increase the amount of suction. If still invalid, should increase the slope of the sieve body. The proportion of light to heavy material flow by changing the amount of air to achieve, the general light flow in about 25%. Light flow too much description of the air volume is too large, the disadvantage is the stone cleaning is not complete. Lightweight flow through less to increase the unit load of the sieve to affect the stone effect. Replace the upper sieve surface second, three sections of the screen can also adjust the proportion of light and heavy material flow.

4, if found in the process of grading, to stone effect is not good, you should check the size of the throttle opening, the height of the stone valve position, the size of the feed flow and feeding uniformity. Yield 125-12-14T / h, 100-type 9-11T / h benefits.

5, the feed adjustment: feeding box with a spring pressure gate and uniform dial, spring pressure gate can stabilize the feed flow, the feed tank should be adjusted by a certain thickness of the material in order to block the air flow from Into the machine, by adjusting the leveling dial, you can make the material evenly distributed in the machine within the sieve width.

6, the air volume regulation: Loosen the fan on the air conditioning butterfly valve handle, by adjusting the handle of the open degree, change the size of the air volume, air volume is appropriate to sieve surface material is subject to suspension.