Nut Roasting Machine Manufacturers

The roasting process: it is mainly the use of heat pump evaporator to absorb heat in the air outside, or recovery of exhaust air in the drying process of waste heat, after the compressor work, energy transport (transfer) to drying, hot air drying box after repeated heating, absorption of moisture in the material, its cooling and humidification, after the hot air or moisture in addition to water condensation process, the material in the water water discharged away, and finally realize the continuous drying of materials.

Usage: The roaster machine is mainly used for drying, heating and heat treatment of products, such as food processing, industrial and agricultural production, scientific research, medical and health, laboratory and other units.

The following points should be paid attention to when the roaster machine is used:

1, put it in the indoor drying level to ensure the effective grounding of the enclosure shell. The placement of test objects should not be too dense to facilitate hot air circulation. Before the start-up, the exhaust valve on the top of the box can be opened about 10mm, so that the air in the box will be changed convective and the moisture and exhaust gas will be discharged.

2, the studio floor above the ban, so as not to be burnt out.

3, fetching test objects, do not hit the sensor into the studio, with the temperature sensor to head loss prevention and control failure.
If you want to know more about the nuts roasting equipment, just contact us.