Commercial Peanut Sheller Machine
Category: Blog
One set commercial peanut sheller mainly includes the rack, fan, rotor, single-phase motor, the screen (size two), into the hopper, vibrating screen, triangular belt and its drive belt and other components. It is a good choice for peanut processing plant and factory.
Working Process of Peanut Shelling Machine
Peanut and broken peanut shells in the rotor under the wind pressure and blow through a certain aperture of the sieve (peanut first threshing with a large hole sieve, cleaned small peanut replaced with a small hole sieve for the second Time shelling), then peanut shells, tablets by the rotating fan blowing force, light weight peanut shells are blown out of the body, peanuts through the sieve to reach the screening purposes.
Correct use of commercial peanut sheller:
① Before use, we must conduct a thorough inspection of the various mechanical parts, including the rotation of the site is also flexible, as well as the various bearings are not enough lubricating oil, we have to be mechanical and stable on the ground on.
② We'd better check the power switch. After the machine is started, the mechanical rotor should be turned in the same direction as the machine. We can test first, the observation is normal. The operation should be uniform and appropriate into the peanut, should not contain iron filings and stones and other debris appear.
③ After the machine has been in use for a period of time, be sure to thoroughly clean it and clean the appearance of dirt, including the cleaning of residual particles in the machine, before stopping using it. The machine must be stored in a dry place and avoid exposure to the sun. And we must keep in mind that the straps are to be removed for safekeeping.
Contact information:
Skype: serenayan666
Email: serena@machinehall.com
Whatsapp/Mobile: +8618595717505
