How to Clean Cocoa Bean Grinder Colloid Mill?

Stainless steel cocoa bean grinder machine is one of our popular sales of stand-alone equipment. Colloid mill is widely used in various fields, such as food, chemical, pharmaceutical, construction and other industries. Recently, our sales department often receive customer calls, advice on how to thoroughly clean the residual material in the machine after the colloid mill used?

For the cleaning colloid mill, the following talk about.

 

Cleaning method is as follows:

1, stop working in the colloid mill, thoroughly rinse the remaining material in the machine, and then shut down and cut off the power.

2, the feed hopper, a discharge tube, the discharge port, toothed teeth, set teeth and clearance adjustment sets were disassembled, and moved to clean area cleaning.

3, it is recommended to clean the teeth with a brush or tweezers, the trench waste residue, and rinse it with water.

4, it is recommended to clean the surface of removable parts with a cleaning agent, pay attention to cleaning the gap dirt, and then rinse with water, dry naturally.

5, online cleaning can not be disassembled parts, washed with water rushed to the mill seat waste residue, with a brush dipped in detergent brush seat grinding groove, and rinse with water.

6, scrub the outer surface of the main part with a cleaning agent, wipe with a clean damp cloth to remove the residual detergent on the outer surface of the subject, wipe it again with a dry cloth.

Also reminded everyone, after using the gel mill, you must do a good job of cleaning, to better extend the life of colloid mill.