Commercial Soybean Milk Making Machine|Production Plant

The machine is a new generation of soybean milk making machine based on the traditional processing equipment of soybean products and combined with modern new technology. The machine is characterized by no need for another pressure boiler. It is a machine for making soya bean milk with steam. The LPG soya bean milk machine is boiled from 50L soya bean milk to the boiling point for about 30 minutes, producing nutritious soya bean milk. If you want to make tofu, you need to match the tofu molding machine.

Features of Commercial Soybean Milk Making Machine
1. Cooking slurry with high temperature closed, the temperature of soybean milk up to 100 ℃ above, to fishy, to eliminate the harmful substances in soybeans on the human body.

2. No gas and water spilled in the process, clean and hygienic working environment.

3. Equipment made of high quality stainless steel, small footprint, safe and simple, one can operate.

4. The machine adopts refining, suction slurry, boiling pulp, forming separate type. Easy to transport, installation, maintenance. It is suitable for family workshops, schools, canteens, supermarkets and other organs.

Soybean Produciton Machine Installation and Test:

First, ready 4 points pipe (with 1/2 hose can also be connected) connected to the water and a slurry valve, check whether there is leaking joints, and then see the water level gauge to join the right amount of water.

Second, connect the matching power supply, please connect the ground wire.

Third, loosen the buckle on the refiner, open the lid to check the upper and lower grinding wheel is tightened, install a slag bucket, Sheng hopper, cover the lid, lock the buckle; and then open the refining switch, pay attention to make Wheel direction of rotation and the same signs, add water, slowly adjust the thickness of the screw rotation, from the slag mouth to hear a slight crack, click, click the sound can be.

Fourth, open the suction switch, test the water pump to see if normal.

Fifth, the temperature controller set to 100 degrees to start work, about 20-30 minutes to observe the steam inside the barrel outlet, if a large number of steam out that the correct installation is complete, you can formally produced.